日本フィジカルAI新聞

世界のフィジカルAIを、日本語で。

マニピュレーションarXiv:2512.24550

接触安定性を考慮した把持計画のための分離型反復表面フィッティング

DISF: Disentangled Iterative Surface Fitting for Contact-stable Grasp Planning with Grasp Pose Alignment to the Object Center of Mass

シェア:XThreadsFacebookLINEはてブBluesky

把持姿勢の最適化を回転・並進・開口幅の3段階に分離し、接触安定性と物体重心への整合を両立させる表面フィッティング手法を提案。シミュレーションと実機で把持成功率の向上を確認した。

詳しい要約

1. どんなもの?

- 表面フィッティングに基づく把持計画アルゴリズムの改良研究。 - 従来の表面フィッティングはgripperと物体表面の幾何学的整合性に注目し、接触点分布の安定性を軽視していた。 - 接触安定性を組み込みつつ幾何学的整合性も保つ新規表面フィッティングアルゴリズムDISFを提案。 - 人間の把持行動に着想を得て、把持姿勢最適化を3段階に分離(disentangle)する。

2. 先行研究と比べてどこがすごい?

- 先行の表面フィッティング型把持計画は幾何学的整合性を主目的とし、接触点分布の安定性を考慮しないため不安定な把持を生じやすかった。 - DISFは接触安定性を最適化に統合しつつ幾何学的整合性を維持する点が新しい。 - 把持姿勢を3段階に分離して最適化する枠組みを導入した点が先行研究と異なる。 - 具体的な先行研究名の比較は要旨からは不明。

3. 技術・手法の肝は?

- 把持姿勢最適化を3つの逐次ステップに分離する。 - (1) rotation optimization: 接触法線(contact normals)を揃える回転最適化。 - (2) translation refinement: gripper frame originと物体Center of Mass (CoM)の整合を改善する並進調整。 - (3) gripper aperture adjustment: 接触点分布を最適化するグリッパ開口調整。 - これらにより接触安定性と幾何学的整合性を両立させる。

4. どうやって有効だと検証した?

- シミュレーションで15物体を対象に検証。 - Known-shape設定(CAD由来のクリーンなデータセット)とObserved-shape設定(YCB物体データセット)の両方で評価。 - 3つのrobot–gripperプラットフォームでのcross-platform把持実行を含む。 - UR3eロボットによる実世界把持実験も実施。 - ベースラインと比較し、CoM misalignmentを低減しつつ幾何学的整合性を維持し、シミュレーションと実世界の双方で把持成功率が向上。

5. 議論はある?

- DISFはCoM misalignmentを低減し幾何学的整合性を維持することで、シミュレーション・実世界双方でベースラインより高い把持成功率を示す。 - 3段階分離による最適化の有効性が示唆される。 - 限界や失敗事例、計算コスト、パラメータ感度などの詳細な議論は要旨からは不明。

6. 次に読むべき論文は?

- 表面フィッティングに基づく把持計画(surface fitting-based grasp planning)の先行研究。 - YCB object datasetを用いた把持研究。 - cross-platform把持実行に関する研究。 - 接触安定性(contact stability)やcontact point distributionを扱う把持計画研究。 - 具体的な論文名は要旨からは不明。

※ AIが要旨から生成した要約です。正確性は原文をご確認ください。

著者: Tomoya Yamanokuchi, Alberto Bacchin, Emilio Olivastri, Ryotaro Arifuku, Takamitsu Matsubara, Emanuele Menegatti

分類: cs.RO

原文アブストラクト

In this work, we address the limitation of surface fitting-based grasp planning algorithm, which primarily focuses on geometric alignment between the gripper and object surface while overlooking the stability of contact point distribution, often resulting in unstable grasps due to inadequate contact configurations. To overcome this limitation, we propose a novel surface fitting algorithm that integrates contact stability while preserving geometric compatibility. Inspired by human grasping behavior, our method disentangles the grasp pose optimization into three sequential steps: (1) rotation optimization to align contact normals, (2) translation refinement to improve the alignment between the gripper frame origin and the object Center of Mass (CoM), and (3) gripper aperture adjustment to optimize contact point distribution. We validate our approach in simulation across 15 objects under both Known-shape (with clean CAD-derived dataset) and Observed-shape (with YCB object dataset) settings, including cross-platform grasp execution on three robot--gripper platforms. We further validate the method in real-world grasp experiments on a UR3e robot. Overall, DISF reduces CoM misalignment while maintaining geometric compatibility, translating into higher grasp success in both simulation and real-world execution compared to baselines. Additional videos and supplementary results are available on our project page: https://tomoya-yamanokuchi.github.io/disf-ras-project-page/

関連論文

  1. 1Boston Dynamics、車輪付きAtlasの研究試作機を紹介研究・技術
  2. 2newmoとKDDIが資本業務提携 2028年に堺市で自動運転タクシー商用化目指す提携・買収
  3. 3GXOとApptronik、Apolloの物流現場試験を拡大 最大1,000台の展開を構想量産・展開
  4. 4NVIDIA、CoRLでGR00T 2とIsaac Lab 3.0を発表新製品・発表
  5. 5UC BerkeleyとNVIDIAの研究者、AIエージェントでロボット制御コードを仮想環境で改善研究・技術

PR・アフィリエイト広告

OZ GAMING(GPU搭載BTOゲーミングPC)

OZ GAMING(GPU搭載BTOゲーミングPC)の公式広告バナーOZ GAMINGで完成品PCを見る ↗
PR本紙発行元 EmplifAI