非線形FEAベースMPCとEKF多センサ融合による磁気駆動カプセルロボットのピッチ角制御
Pitch Angle Control of a Magnetically Actuated Capsule Robot with Nonlinear FEA-based MPC and EKF Multisensory Fusion
4コイル電磁アレイで駆動するカプセルロボットのピッチ角を、FEAに基づく非線形MPCとEKFセンサ融合で制御し、低カメラ更新率でも安定な姿勢制御を実現した。
詳しい要約
1. どんなもの?
2. 先行研究と比べてどこがすごい?
3. 技術・手法の肝は?
4. どうやって有効だと検証した?
5. 議論はある?
6. 次に読むべき論文は?
※ AIが要旨から生成した要約です。正確性は原文をご確認ください。
著者: Chongxun Wang, Zikang Shen, Apoorav Rathore, Akanimoh Udombeh, Harrison Teng, Fangzhou Xia
分類: cs.RO
原文アブストラクト
Magnetically actuated capsule robots promise minimally invasive diagnosis and therapy in the gastrointestinal (GI) tract, but existing systems largely neglect control of capsule pitch, a degree of freedom critical for contact-rich interaction with inclined gastric walls. This paper presents a nonlinear, model-based framework for magnetic pitch control of an ingestible capsule robot actuated by a four-coil electromagnetic array. Angle-dependent magnetic forces and torques acting on embedded permanent magnets are characterized using three-dimensional finite-element simulations and embedded as lookup tables in a control-oriented rigid-body pitching model with rolling contact and actuator dynamics. A constrained model predictive controller (MPC) is designed to regulate pitch while respecting hardware-imposed current and slew-rate limits. Experiments on a compliant stomach-inspired surface demonstrate robust pitch reorientation from both horizontal and upright configurations, achieving about three to five times faster settling and reduced oscillatory motion than on-off control. Furthermore, an extended Kalman filter (EKF) fusing inertial sensing with intermittent visual measurements enables stable closed-loop control when the camera update rate is reduced from 30 Hz to 1 Hz, emulating clinically realistic imaging constraints. These results establish finite-element-informed MPC with sensor fusion as a scalable strategy for pitch regulation, controlled docking, and future multi-degree-of-freedom capsule locomotion.
関連論文
- 経験時代における実世界コード・アズ・ポリシー:ACE-CaP-0マニピュレーション
- 把持のアドミタンスによる入出力特性評価:設計パラメータと把持挙動の接続マニピュレーション
- ManiLadder:カテゴリ別・多難易度タスクラダーによるロボットマニピュレーションのベンチマークマニピュレーション
- 成功確率を変える事象を記憶する:Criticゲート付きイベントメモリによる長期的マニピュレーションマニピュレーション
- BiPOP: 長期的な両腕ロボット操作のための部分順序計画マニピュレーション
- RUMI: 拡張現実と触覚フィードバックを備えたRobotiq対応の汎用マニピュレーションインターフェースマニピュレーション
