近距離ランデブー軌道設計と誘導のための自律型エンドツーエンド凸最適化フレームワーク:ハードウェアテストベッドによる検証
An Autonomous, End-to-End, Convex-Based Framework for Close-Range Rendezvous Trajectory Design and Guidance with Hardware Testbed Validation
深層学習による知覚と凸最適化に基づく軌道設計・誘導を統合し、センサ故障やエンジン故障にも対応する近距離ランデブー自律フレームワークCORTEXを提案し、シミュレーションとハードウェア実験で検証した。
詳しい要約
1. どんなもの?
2. 先行研究と比べてどこがすごい?
3. 技術・手法の肝は?
4. どうやって有効だと検証した?
5. 議論はある?
6. 次に読むべき論文は?
※ AIが要旨から生成した要約です。正確性は原文をご確認ください。
著者: Minduli C. Wijayatunga, Julian Guinane, Nathan D. Wallace, Xiaofeng Wu
分類: cs.RO, math.OC
原文アブストラクト
Autonomous satellite servicing missions must execute close-range rendezvous under stringent safety and operational constraints while remaining computationally tractable for onboard use and robust to uncertainty in sensing, actuation, and dynamics. This paper presents CORTEX (Convex Optimization for Rendezvous Trajectory Execution), an autonomous, perception-enabled, real-time trajectory design and guidance framework for close-range rendezvous. CORTEX integrates a deep-learning perception pipeline with convex-optimisation-based trajectory design and guidance, including reference regeneration and abort-to-safe-orbit logic to recover from large deviations caused by sensor faults and engine failures. CORTEX is validated in high-fidelity software simulation and hardware-in-the-loop experiments. The software pipeline (Basilisk) models high-fidelity relative dynamics, realistic thruster execution, perception, and attitude control. Hardware testing uses (i) an optical navigation testbed to assess perception-to-estimation performance and (ii) a planar air-bearing testbed to evaluate the end-to-end guidance loop under representative actuation and subsystem effects. A Monte-Carlo campaign in simulation includes initial-state uncertainty, thrust-magnitude errors, and missed-thrust events; under the strongest case investigated, CORTEX achieves terminal docking errors of $36.85 \pm 44.46$ mm in relative position and $1.25 \pm 2.26$ mm/s in relative velocity. On the planar air-bearing testbed, 18 cases are executed (10 nominal; 8 off-nominal requiring recomputation and/or abort due to simulated engine failure and sensor malfunctions), yielding terminal errors of $8.09 \pm 5.29$ mm in position and $2.23 \pm 1.72$ mm/s in velocity.
