実環境制約下における設置済みmmWaveレーダーモジュールの半球角度パワーマッピング
Hemispherical Angular Power Mapping of Installed mmWave Radar Modules Under Realistic Deployment Constraints
設置後のmmWaveレーダーモジュールの放射特性を、実環境で半球状に受信電力を測定して評価する手法を提案し、60GHzモジュールで検証した。
詳しい要約
1. どんなもの?
2. 先行研究と比べてどこがすごい?
3. 技術・手法の肝は?
4. どうやって有効だと検証した?
5. 議論はある?
6. 次に読むべき論文は?
※ AIが要旨から生成した要約です。正確性は原文をご確認ください。
著者: Maaz Qureshi, Mohammad Omid Bagheri, William Melek, George Shaker
分類: cs.RO
原文アブストラクト
Characterizing the angular radiation behavior of installed millimeter-wave (mmWave) radar modules is increasingly important in practical sensing platforms, where packaging, mounting hardware, and nearby structures can significantly alter the effective emission profile. However, once a device is embedded in its host environment, conventional chamber- and turntable-based antenna measurements are often impractical. This paper presents a hemispherical angular received-power mapping methodology for in-situ EM validation of installed mmWave modules under realistic deployment constraints. The approach samples the accessible half-space around a stationary device-under-test by placing a calibrated receiving probe at prescribed (phi, theta, r) locations using geometry-consistent positioning and quasi-static acquisition. Amplitude-only received-power is recorded using standard RF instrumentation to generate hemispherical angular power maps that capture installation-dependent radiation characteristics. Proof-of-concept measurements on a 60-GHz radar module demonstrate repeatable hemi-spherical mapping with angular trends in good agreement with full-wave simulation, supporting practical on-site characterization of embedded mmWave transmitters.
