ソフトロボットのための相補性に基づく統合接触モデリングと計画
Unified Complementarity-Based Contact Modeling and Planning for Soft Robots
ソフトロボットの接触を線形相補性問題(LCP)で統一的にモデル化し、冗長接触や悪条件を三段階の前処理で解決するとともに、MPCCによる接触を伴う軌道最適化を実現した。
詳しい要約
1. どんなもの?
2. 先行研究と比べてどこがすごい?
3. 技術・手法の肝は?
4. どうやって有効だと検証した?
5. 議論はある?
6. 次に読むべき論文は?
※ AIが要旨から生成した要約です。正確性は原文をご確認ください。
著者: Milad Azizkhani, Yue Chen
分類: cs.RO
原文アブストラクト
Soft robots were introduced in large part to enable safe, adaptive interaction with the environment, and this interaction relies fundamentally on contact. However, modeling and planning contact-rich interactions for soft robots remain challenging: dense contact candidates along the body create redundant constraints and rank-deficient LCPs, while the disparity between high stiffness and low friction introduces severe ill-conditioning. Existing approaches rely on problem-specific approximations or penalty-based treatments. This letter presents a unified complementarity-based framework for soft-robot contact modeling and planning that brings contact modeling, manipulation, and planning into a unified, physically consistent formulation. We develop a robust Linear Complementarity Problem (LCP) model tailored to discretized soft robots and address these challenges with a three-stage conditioning pipeline: inertial rank selection to remove redundant contacts, Ruiz equilibration to correct scale disparity and ill-conditioning, and lightweight Tikhonov regularization on normal blocks. Building on the same formulation, we introduce a kinematically guided warm-start strategy that enables dynamic trajectory optimization through contact using Mathematical Programs with Complementarity Constraints (MPCC) and demonstrate its effectiveness on contact-rich ball manipulation tasks. In conclusion, CUSP provides a new foundation for unifying contact modeling, simulation, and planning in soft robotics.
