日本フィジカルAI新聞

世界のフィジカルAIを、日本語で。

触覚/挿入arXiv:2603.03627

Touch2Insert: 触覚によるピンと穴の交差検出を用いたゼロショット挿入

Touch2Insert: Zero-Shot Peg Insertion by Touching Intersections of Peg and Hole

シェア:XThreadsFacebookLINEはてブBluesky

触覚センサでピンと穴の断面形状を再構成し、位置合わせにより未知形状のコネクタ挿入をゼロショットで実現する手法を提案。シミュレーションと実機で高い精度と成功率を確認した。

詳しい要約

1. どんなもの?

- 産業用コネクタの挿入を対象としたロボティクス研究。 - 触覚センシングを用いて、pegとholeの交差部を接触により検出し、ゼロショットで挿入を実現するフレームワーク「Touch2Insert」を提案。 - 高解像度触覚画像から断面形状を再構成し、holeのpegに対する相対姿勢を推定する。 - 単一接触から形状を位置合わせすることで、タスク固有の訓練なしに挿入を可能にする。

2. 先行研究と比べてどこがすごい?

- 視覚ベース手法はオクルージョンや未知形状への汎化に課題がある。 - 学習ベースのポリシーは未知の形状への転移が困難。 - 触覚センシングは接触点の局所表面形状を捉え、オクルージョン下や新規形状でも信頼できる情報を提供する。 - これにより、タスク固有の訓練なしで任意のpeg挿入を可能にした点が優れている。

3. 技術・手法の肝は?

- 高解像度触覚画像から断面形状を再構成する。 - 再構成した形状を位置合わせ(registration)することで、holeのpegに対する相対姿勢を推定する。 - 単一接触からゼロショットで挿入を実現する。 - タスク固有の訓練を必要としない。

4. どうやって有効だと検証した?

- シミュレーションと実機の両方で、3種類の多様なコネクタを用いて実験を実施。 - シミュレーションでは全コネクタでサブミリメートルの姿勢推定精度を達成。 - 実機では平均成功率86.7%を達成し、触覚センシングのロバスト性と汎化性を確認。

5. 議論はある?

- 要旨からは不明。

6. 次に読むべき論文は?

- 要旨で参照/比較されている研究は明示されていない。 - 関連手法として、視覚ベースの挿入、学習ベースのポリシー、触覚センシングを用いた挿入が挙げられる。 - 同分野の定番として、Vision-based peg insertion、Learning-based policies、Tactile sensing for manipulation などが考えられる。

※ AIが要旨から生成した要約です。正確性は原文をご確認ください。

著者: Masaru Yajima, Yuma Shin, Rei Kawakami, Asako Kanezaki, Kei Ota

分類: cs.RO

原文アブストラクト

Reliable insertion of industrial connectors remains a central challenge in robotics, requiring sub-millimeter precision under uncertainty and often without full visual access. Vision-based approaches struggle with occlusion and limited generalization, while learning-based policies frequently fail to transfer to unseen geometries. To address these limitations, we leverage tactile sensing, which captures local surface geometry at the point of contact and thus provides reliable information even under occlusion and across novel connector shapes. Building on this capability, we present \emph{Touch2Insert}, a tactile-based framework for arbitrary peg insertion. Our method reconstructs cross-sectional geometry from high-resolution tactile images and estimates the relative pose of the hole with respect to the peg in a zero-shot manner. By aligning reconstructed shapes through registration, the framework enables insertion from a single contact without task-specific training. To evaluate its performance, we conducted experiments with three diverse connectors in both simulation and real-robot settings. The results indicate that Touch2Insert achieved sub-millimeter pose estimation accuracy for all connectors in simulation, and attained an average success rate of 86.7\% on the real robot, thereby confirming the robustness and generalizability of tactile sensing for real-world robotic connector insertion.

  1. 1Boston Dynamics、車輪付きAtlasの研究試作機を紹介研究・技術
  2. 2newmoとKDDIが資本業務提携 2028年に堺市で自動運転タクシー商用化目指す提携・買収
  3. 3GXOとApptronik、Apolloの物流現場試験を拡大 最大1,000台の展開を構想量産・展開
  4. 4NVIDIA、CoRLでGR00T 2とIsaac Lab 3.0を発表新製品・発表
  5. 5UC BerkeleyとNVIDIAの研究者、AIエージェントでロボット制御コードを仮想環境で改善研究・技術

PR・アフィリエイト広告

FRONTIER(GPU搭載BTOパソコン)

FRONTIER(GPU搭載BTOパソコン)の公式広告バナーFRONTIERでGPU搭載PCを見る ↗
PR本紙発行元 EmplifAI