腱駆動ロボットの強化学習ポリシーのSim2Real転送のための腱力モデリング
Tendon Force Modeling for Sim2Real Transfer of Reinforcement Learning Policies for Tendon-Driven Robots
腱駆動ロボットの強化学習ポリシーを実機に転送する際のシミュレーションと実機のギャップを減らすため、サーボモータが生成する腱力をモデル化する手法を提案した。
詳しい要約
1. どんなもの?
2. 先行研究と比べてどこがすごい?
3. 技術・手法の肝は?
4. どうやって有効だと検証した?
5. 議論はある?
6. 次に読むべき論文は?
※ AIが要旨から生成した要約です。正確性は原文をご確認ください。
著者: Valentin Yuryev, Josie Hughes
分類: cs.RO
原文アブストラクト
Robots which make use of soft or compliant inter- actions often leverage tendon-driven actuation which enables actuators to be placed more flexibly, and compliance to be maintained. However, controlling complex tendon systems is challenging. Simulation paired with reinforcement learning (RL) could be enable more complex behaviors to be generated. Such methods rely on torque and force-based simulation roll- outs which are limited by the sim-to-real gap, stemming from the actuator and system dynamics, resulting in poor transfer of RL policies onto real robots. To address this, we propose a method to model the tendon forces produced by typical servo motors, focusing specifically on the transfer of RL policies for a tendon driven finger. Our approach extends existing data- driven techniques by leveraging contextual history and a novel data collection test-bench. This test-bench allows us to capture tendon forces undergo contact-rich interactions typical of real- world manipulation. We then utilize our force estimation model in a GPU-accelerated tendon force-driven rigid body simulation to train RL-based controllers. Our transformer-based model is capable of predicting tendon forces within 3% of the maximum motor force and is robot-agnostic. By integrating our learned model into simulation, we reduce the sim-to-real gap for test trajectories by 41%. RL-based controller trained with our model achieves a 50% improvement in fingertip pose tracking tasks on real tendon-driven robotic fingers. This approach is generalizable to different actuators and robot systems, and can enable RL policies to be used widely across tendon systems, advancing capabilities of dexterous manipulators and soft robots.
