エネルギー最小化によるテンセグリティマニピュレータの自己受容的形状推定
Proprioceptive Shape Estimation of Tensegrity Manipulators Using Energy Minimisation
各支柱にIMUを取り付け傾斜角のみを用い、エネルギー最小化でテンセグリティマニピュレータ全体の形状を推定する手法を提案・実証した。
詳しい要約
1. どんなもの?
2. 先行研究と比べてどこがすごい?
3. 技術・手法の肝は?
4. どうやって有効だと検証した?
5. 議論はある?
6. 次に読むべき論文は?
※ AIが要旨から生成した要約です。正確性は原文をご確認ください。
著者: Tufail Ahmad Bhat, Shuhei Ikemoto
分類: cs.RO
原文アブストラクト
Shape estimation is fundamental for controlling continuously bending tensegrity manipulators, yet achieving it remains a challenge. Although using exteroceptive sensors makes the implementation straightforward, it is costly and limited to specific environments. Proprioceptive approaches, by contrast, do not suffer from these limitations. So far, several methods have been proposed; however, to our knowledge, there are no proven examples of large-scale tensegrity structures used as manipulators. This paper demonstrates that shape estimation of the entire tensegrity manipulator can be achieved using only the inclination angle information relative to gravity for each strut. Inclination angle information is intrinsic sensory data that can be obtained simply by attaching an inertial measurement unit (IMU) to each strut. Experiments conducted on a five-layer tensegrity manipulator with 20 struts and a total length of 1160 mm demonstrate that the proposed method can estimate the shape with an accuracy of 2.1 \% of the total manipulator length, from arbitrary initial conditions under both static conditions and maintains stable shape estimation under external disturbances.
