高精度ヘキサポッドロボットアクチュエータのモデルベース熱ドリフト補償
Model-based thermal drift compensation for high-precision hexapod robot actuators
ヘキサポッドロボットのアクチュエータの熱膨張による位置誤差を、表面温度から膨張状態を推定するモデルを用いて補正し、実験で80%以上の誤差低減を実証した。
詳しい要約
1. どんなもの?
2. 先行研究と比べてどこがすごい?
3. 技術・手法の肝は?
4. どうやって有効だと検証した?
5. 議論はある?
6. 次に読むべき論文は?
※ AIが要旨から生成した要約です。正確性は原文をご確認ください。
著者: Clément Robert, Alain Vissiere, Olivier Company, Pierre Noire, Thierry Roux, Sébastien Krut
分類: cs.RO
原文アブストラクト
Thermal expansion is a significant source of positioning error in high-precision hexapod robots (Gough-Stewart platforms). Any variation in the temperature of the hexapod's parts induces expansion, which alters their kinematic model and reduces the robot's accuracy and repeatability. These variations may arise from internal heat sources (such as motors, encoders, and electronics) or from environmental changes. In this study, a method is proposed to anticipate and therefore correct the thermal drift of one of the hexapod precision electro-mechanical actuators. This method is based on determining a model that links the expansion state of the actuator at any given moment to the temperature of some well-chosen points on its surface. This model was initially developed theoretically. Its coefficients were then adjusted experimentally on a specific test-bench, based on a rigorous measurement campaign of actuator expansion using a high-precision interferometric measurement system. Experimental validation demonstrates a reduction of thermally induced expansion by more than 80%. This paves the way for thermal drift correction across the entire robot or similar robotics parts.
