アクチュエータ最適化を伴う五節単脚ロボットの高性能跳躍のための協調設計フレームワーク
A Co-Design Framework for High-Performance Jumping of a Five-Bar Monoped with Actuator Optimization
五節閉リンク単脚ロボットの跳躍性能を最大化するため、機構設計・モータ/ギアボックスパラメータ・制御パラメータを同時最適化する協調設計フレームワークを提案し、シミュレーションで跳躍距離30.4%向上と消費エネルギー11.5%削減を実証した。
詳しい要約
1. どんなもの?
2. 先行研究と比べてどこがすごい?
3. 技術・手法の肝は?
4. どうやって有効だと検証した?
5. 議論はある?
6. 次に読むべき論文は?
※ AIが要旨から生成した要約です。正確性は原文をご確認ください。
著者: Aastha Mishra, Aman Singh, Shishir Kolathaya
分類: cs.RO
原文アブストラクト
The performance of legged robots depends strongly on both mechanical design and control, motivating co-design approaches that jointly optimize these parameters. However, most existing co-design studies focus on link dimensions and transmission ratios while neglecting detailed actuator design, particularly motor and gearbox parameter optimization, and are largely limited to serial open-chain mechanisms. In this work, we present a co-design framework for a planar closed-chain five-bar monoped that jointly optimizes mechanical design, motor and gearbox parameters, and control parameters for dynamic jumping. The objective is to maximize jump distance while minimizing mechanical energy consumption. The framework employs a two-stage optimization approach, where actuator optimization generates a mapping from gear ratio to actuator mass, efficiency, and peak torque, which is then incorporated into CMA-ES-based co-design optimization of the robot design and control parameters. Simulation results demonstrate an improvement of approximately 30.4% in jump distance and an 11.5% reduction in mechanical energy consumption compared to a nominal design, highlighting the effectiveness of the proposed framework for high-performance and energy-efficient planar jumping.
