CT-VIR: スパースアンカーを用いた屋内位置推定のための連続時間ビジュアル慣性レンジング融合
CT-VIR: Continuous-Time Visual-Inertial-Ranging Fusion for Indoor Localization with Sparse Anchors
VIOのドリフトをUWBレンジングで補正する際、スプラインによる連続時間軌跡表現とスライディングウィンドウ最適化で、非同期センサ融合の精度と効率を両立する手法を提案した。
詳しい要約
1. どんなもの?
2. 先行研究と比べてどこがすごい?
3. 技術・手法の肝は?
4. どうやって有効だと検証した?
5. 議論はある?
6. 次に読むべき論文は?
※ AIが要旨から生成した要約です。正確性は原文をご確認ください。
分類: cs.RO
原文アブストラクト
Visual-inertial odometry (VIO) is widely used for mobile robot localization, but its long-term accuracy degrades without global constraints. Incorporating ranging sensors such as ultra-wideband (UWB) can mitigate drift; however, high-accuracy ranging usually requires well-deployed anchors, which is difficult to ensure in narrow or low-power environments. Moreover, most existing visual-inertial-ranging (VIR) fusion methods rely on discrete time-based filtering or optimization, making it difficult to balance positioning accuracy, trajectory consistency, and fusion efficiency under asynchronous multi-sensor sampling. To address these issues, we propose a spline-based continuous-time state estimation method for VIR fusion localization. In the preprocessing stage, VIO motion priors and UWB ranging measurements are used to construct virtual anchors and reject outliers, thereby alleviating geometric degeneration and improving range reliability. In the estimation stage, the pose trajectory is parameterized in continuous time using a B-spline, while inertial, visual, and ranging constraints are formulated as factors in a sliding-window graph. The spline control points, together with a small set of auxiliary parameters, are then jointly optimized to obtain a continuous-time trajectory estimate. Evaluations on public datasets and real-world experiments demonstrate the effectiveness and practical potential of the proposed approach.
