Aerobatプラットフォームにおける翼リンク変調による推力調整:圧電スリップスティック駆動レギュレータの開発
Thrust Regulation Through Wing Linkage Modulation on the Aerobat Platform: Piezoelectric Slip-Stick Actuated Regulator Development
コウモリ型羽ばたきロボットAerobatにおいて、翼のリンク長を圧電スリップスティックアクチュエータで変調し、個別の推力制御を目指した研究。実験によりリンク長の増加がピーク揚力を増加させることを確認した。
詳しい要約
1. どんなもの?
2. 先行研究と比べてどこがすごい?
3. 技術・手法の肝は?
4. どうやって有効だと検証した?
5. 議論はある?
6. 次に読むべき論文は?
※ AIが要旨から生成した要約です。正確性は原文をご確認ください。
著者: Luca Ciampaglia
分類: cs.RO
原文アブストラクト
Aerobat is a bat-inspired flapping-wing robot with a wing gait generate by the computational structure, a planar linkage of carbon fiber links driven by a single motor. This design minimizes weight but couples both wings to a shared input motor, eliminating independent thrust control and preventing asymmetric maneuvers. This thesis investigates thrust regulation by modifying the effective length of the first radius link $R_1$ in the computational structure. Static experiments using FDM-printed $R_1$ links at three lengths (28.58, 29.33, and 30.08 mm) across 3,4, and 5 Hz flapping frequencies demonstrated that a 1.5 mm length increase produced a 37% increase in peak lift force and shifted peak force timing within the downstroke. An additional experiment using a string-actuated regulator mechanism was performed. Further actuation methods were evaluated: sub-gram micro-servo and piezoelectric slip-stick. After both the string-tension and micro-servo actuation methods failed due to structural member compliance and motor fragility respectively, a TULA-50 piezoelectric slip-stick actuator was selected. Multiple force-amplifying mechanisms were prototyped, resulting in a direct-drive variable-length mechanism. This final mechanism was demonstrated in a preliminary bench-top test, though insufficient force output prevented dynamic testing during flapping. This work establishes linkage-length modulation via embedded slip-stick actuation as a viable approach to independent wing thrust control.
