モデル予測コンタリング制御を用いた連結商用車の軌道計画
Trajectory Planning for an Articulated Commercial Vehicle using Model Predictive Contouring Control
トラクタとセミトレーラからなる連結商用車の軌道計画にMPCCを拡張し、シナリオに応じたアンカーポイントの重み付けと道路境界制約を導入して前進・後退の両方向での走行を実現した。
詳しい要約
1. どんなもの?
2. 先行研究と比べてどこがすごい?
3. 技術・手法の肝は?
4. どうやって有効だと検証した?
5. 議論はある?
6. 次に読むべき論文は?
※ AIが要旨から生成した要約です。正確性は原文をご確認ください。
著者: A. J. Aertssen, R. G. M. Huisman, I. J. M. Besselink, J. Elfring, M. J. G. van de Molengraft
分類: cs.RO
原文アブストラクト
This paper presents a trajectory planning method for articulated commercial vehicles, specifically tractor-semitrailers, based on Model Predictive Contouring Control (MPCC). Although MPCC has proven effective for passenger cars, it is generally ill-suited for tractor-semitrailers. These vehicles are significantly larger, the semitrailer follows a different path than the tractor, and reversing maneuvers are unstable and prone to jackknifing. Furthermore, practical driving scenarios often require scenario-dependent prioritization of different vehicle `anchor points', e.g., prioritizing the semitrailer position during docking or the tractor position when parking to charge. Therefore, we extend MPCC to enable scenario-dependent weighting of these anchor points and incorporate explicit road-boundary constraints for the front and rear tractor axles and the semitrailer axle, thereby ensuring that all considered wheels remain within the drivable area. The simulation results demonstrate the successful navigation of a representative logistic scenario in both forward and reverse direction. Furthermore, the influence of the optimization parameters on the trajectories is analyzed, providing insights into controlling the vehicle behavior. Finally, first tests using a full-scale prototype vehicle show the practical applicability of the approach.
