オンライン同定を用いたINDI制御クアッドローターのロバストH∞コントローラ設計
Robust $\mathcal{H}_\infty$ Controller Design For INDI-Controlled Quadrotor Using Online Parameter Identification
INDI制御のクアッドローターに対し、オンラインで同定したパラメータに基づき、ゲインスケジュール型のロバストH∞姿勢制御器を設計し、シミュレーションと実機試験で有効性を確認した。
詳しい要約
1. どんなもの?
2. 先行研究と比べてどこがすごい?
3. 技術・手法の肝は?
4. どうやって有効だと検証した?
5. 議論はある?
6. 次に読むべき論文は?
※ AIが要旨から生成した要約です。正確性は原文をご確認ください。
著者: Tom Aantjes, Till M. Blaha, Spilios Theodoulis, Ewoud J. J. Smeur
分類: cs.RO
原文アブストラクト
It has recently been shown that all physical parameters of an Incremental Nonlinear Dynamic Inversion (INDI) controller can be estimated onboard a multirotor within half a second, which is fast enough to do the full identification during a throw in the air. However, a robust method to tune outer loop gains for this feedback-linearizing INDI controller depending on the model parameters is still missing. This work presents the design of a robust gain-scheduled controller for attitude control of quadrotor, using an INDI-based inner loop with online identification of its system parameters. A gain-scheduled cascaded attitude controller with a feedforward filter is synthesized for a symmetric quadrotor using signal-based $\mathcal{H}_\infty$ closed-loop shaping. The resulting controller exhibits good stability margins, with nonlinear simulations confirming effective tracking performance under uncertainty. Experimental evaluation is also conducted through flight tests with full online parameter identification. Even though the identified parameters during these tests are far outside the defined uncertainty range, acceptable flight performance comparable to simulation results is maintained for actuator time constants below 40 ms.
