日本フィジカルAI新聞

世界のフィジカルAIを、日本語で。

クレーン制御arXiv:2605.14944

旋回クレーンの行動データ駆動による最適軌道生成

Behavioral Data-Driven Optimal Trajectory Generation for Rotary Cranes

シェア:XThreadsFacebookLINEはてブBluesky

旋回クレーンの荷振れを抑える開ループ軌道を、システムモデルを使わずに測定データから直接生成する手法を提案し、実験でモデルベース手法より最大35%の荷振れ低減を達成した。

詳しい要約

1. どんなもの?

- 回転式クレーンの自動制御において、荷振れを抑制しつつ動作時間とエネルギー消費を低減する開ループ旋回軌道を生成する手法。 - 行動データ駆動型フレームワークで、Willemsの基本補題とその一般化に基づき、明示的なシステムモデリングを回避し、測定された入出力データに直接作用する。 - 専門知識の必要性を減らす実用的ワークフローを提示。 - クレーン動力学のunderactuated性にもかかわらず、限られたデータと凸最適化を用いてシステム挙動のノンパラメトリック表現を同定し、滑らかで最適な軌道を生成する。

2. 先行研究と比べてどこがすごい?

- 古典的なモデルベース制御は正確な動力学モデルと専門家によるチューニングに依存し、安全性と精度の要件を満たすのに苦労することが多い。 - 多くの学習ベースアプローチは大規模データセットと多大な計算資源を必要とする。 - 提案手法は、明示的なモデリングを不要にし、限られたデータと凸最適化で軌道生成を可能にする点が優れている。 - 実験でモデルベース手法と比較し、荷振れ最大35%低減、追従誤差43%低減、移動時間50%短縮を達成。

3. 技術・手法の肝は?

- Willemsの基本補題とその一般化を基盤とし、システムの入出力データから直接的に挙動を表現。 - ノンパラメトリック表現を同定し、凸最適化により滑らかな最適軌道を生成。 - underactuatedなクレーン動力学に対処するため、限られたデータで動作。 - 専門知識を減らす実用的ワークフローを提示。

4. どうやって有効だと検証した?

- 実験室のクレーン装置で提案する軌道生成手法を検証。 - 確立されたモデルベースアプローチと比較。 - 結果として、荷振れ最大35%低減、追従誤差43%低減、移動時間50%短縮を達成。

5. 議論はある?

- 要旨からは不明。

6. 次に読むべき論文は?

- Willems' fundamental lemma - モデルベース制御手法(具体的名称は要旨からは不明) - 学習ベースアプローチ(具体的名称は要旨からは不明)

※ AIが要旨から生成した要約です。正確性は原文をご確認ください。

著者: Iskandar Khemakhem, Manuel Zobel, Johannes Schüle, Oliver Sawodny, Naoki Uchiyama, Abdallah Farrage

分類: cs.RO, cs.SY, eess.SY

原文アブストラクト

With the growth of the construction industry and the global shortage of skilled labor, the automation of crane control has become increasingly important for safe and efficient operations. A central challenge in automatic crane control is the reduction of load oscillations during motion, which is primarily addressed through appropriate slewing trajectories. In this context, classical model-based control methods rely on accurate dynamical models and expert tuning, and often struggle to meet safety and precision requirements, while many learning-based approaches require large data sets and significant computational resources. This paper proposes a behavioral data-driven framework for generating open-loop slewing trajectories for rotary cranes that suppress load sway while reducing operation time and energy consumption. The approach builds on Willems' fundamental lemma and its generalizations, to bypass explicit system modeling and operate directly on measured input-output data. A practical workflow is presented in this paper to reduce the need for expert knowledge. Despite the underactuated nature of the crane dynamics, the method identifies a nonparametric representation of the system behavior and generates smooth, optimal trajectories using limited data and convex optimization. The proposed trajectory generation method is validated on a laboratory crane setup and compared against an established model-based approach, achieving up to 35% reduction in load sway, 43% reduction in tracking error, and 50% reduction in travel time.

関連論文

  1. 1Boston Dynamics、車輪付きAtlasの研究試作機を紹介研究・技術
  2. 2newmoとKDDIが資本業務提携 2028年に堺市で自動運転タクシー商用化目指す提携・買収
  3. 3GXOとApptronik、Apolloの物流現場試験を拡大 最大1,000台の展開を構想量産・展開
  4. 4NVIDIA、CoRLでGR00T 2とIsaac Lab 3.0を発表新製品・発表
  5. 5UC BerkeleyとNVIDIAの研究者、AIエージェントでロボット制御コードを仮想環境で改善研究・技術

PR・アフィリエイト広告

MINISFORUM(ミニPC)

MINISFORUM(ミニPC)の公式広告バナーMINISFORUM公式ストアを見る ↗
PR本紙発行元 EmplifAI