日本フィジカルAI新聞

世界のフィジカルAIを、日本語で。

医療ロボティクスarXiv:2605.16870

自己感知型腱ループによる腱-シース機構のヒステリシスモデリングと補償

SSTL: Self-Sensing Tendon Loop for Hysteresis Modeling and Compensation in Tendon-Sheath Mechanisms

シェア:XThreadsFacebookLINEはてブBluesky

柔軟内視鏡ロボットの腱-シース機構における構成依存のヒステリシスを、近位側で張力を計測できる二重ループ構造(SSTL)を用いて学習ベースで推定し、フィードフォワード制御で補償する手法を提案した。

詳しい要約

1. どんなもの?

- 柔軟内視鏡ロボットの tendon-sheath mechanisms (TSMs) における configuration-dependent hysteresis を補償する手法。 - Self-Sensing Tendon Loop (SSTL) を提案。 - SSTL は insertion tube を通り distal pulley に巻き付いて proximal に戻る double-pass tendon loop。 - 入力と出力の張力を proximal で測定可能。 - 学習ベースのマッピングで actuation TSM の hysteresis parameters を推定し、feedforward controller で補償。

2. 先行研究と比べてどこがすごい?

- 従来は distal force sensor や fiber-optic sensor が必要だったが、SSTL は proximal のみで入力-出力張力プロファイルを取得可能。 - 直接同定 (direct identification) に匹敵する性能を、直接測定なしで達成。 - 平均 RMSE を uncompensated baseline 比で 88.1% 削減。 - direct identification の 97.8% の性能を実現。

3. 技術・手法の肝は?

- SSTL は actuation TSM と同じ routing path を共有し、ヒステリシス挙動が強く相関。 - SSTL の張力プロファイルから学習ベースのマッピングで configuration-dependent hysteresis parameters を推定。 - 推定パラメータを feedforward controller に用いて actuation hysteresis を補償。 - distal force sensor や fiber-optic sensor は不要。

4. どうやって有効だと検証した?

- 3 つの異なる insertion tube configurations 下で actuation tendon tension を追従。 - sinusoidal および random trajectories で評価。 - 提案手法は uncompensated baseline 比で平均 RMSE を 88.1% 削減。 - direct identification の 97.8% の性能を達成。

5. 議論はある?

- 要旨からは不明。 - ただし、SSTL と actuation TSM のヒステリシス相関が強いことが前提。 - 学習ベースマッピングの汎化性や他の configuration への適用性は議論されていない。

6. 次に読むべき論文は?

- 要旨で参照/比較されている研究: direct identification (actuation TSM の入力-出力張力プロファイルを直接測定する手法)。 - 関連手法: tendon-sheath mechanisms (TSMs) の hysteresis modeling and compensation。 - 同分野の定番: tendon-driven robots の hysteresis compensation、flexible endoscopic robots の制御。

※ AIが要旨から生成した要約です。正確性は原文をご確認ください。

著者: Myeongbo Park, Junhyun Park, Ihsan Ullah, Chunggil An, Minho Hwang

分類: cs.RO

原文アブストラクト

Flexible endoscopic robots enable minimally invasive access through natural orifices, but their control accuracy is limited by configuration-dependent hysteresis in the tendon-sheath mechanisms (TSMs). Tendon-sheath friction and tendon elasticity induce a systematic discrepancy between the proximal actuation input and distal output, and this discrepancy varies with the insertion tube configuration. To address this challenge, this paper proposes the Self-Sensing Tendon Loop (SSTL), a double-pass tendon loop routed through the insertion tube and wrapped around a distal pulley, and returned to the proximal end. The loop structure allows both the input and output tensions of the SSTL to be measured proximally, thereby providing an input-output tension profile without requiring distal force or fiber-optic sensors. Because the SSTL shares the same routing path as the actuation TSM, the two TSMs exhibit strongly correlated hysteresis behaviors. From the SSTL tension profile, a learning-based mapping estimates the configuration-dependent hysteresis parameters of the actuation TSM, which are then used by a feedforward controller to compensate for actuation hysteresis. We validate the proposed method by tracking actuation tendon tension under three different insertion tube configurations. Across sinusoidal and random trajectories, the proposed method reduces average RMSE by 88.1% compared with the uncompensated baseline, achieving 97.8% of the performance of direct identification, which requires direct measurement of the input and output tension profile of the actuation TSM.

関連論文

  1. 1Boston Dynamics、車輪付きAtlasの研究試作機を紹介研究・技術
  2. 2newmoとKDDIが資本業務提携 2028年に堺市で自動運転タクシー商用化目指す提携・買収
  3. 3GXOとApptronik、Apolloの物流現場試験を拡大 最大1,000台の展開を構想量産・展開
  4. 4NVIDIA、CoRLでGR00T 2とIsaac Lab 3.0を発表新製品・発表
  5. 5UC BerkeleyとNVIDIAの研究者、AIエージェントでロボット制御コードを仮想環境で改善研究・技術

PR・アフィリエイト広告

MINISFORUM(ミニPC)

MINISFORUM(ミニPC)の公式広告バナーMINISFORUM公式ストアを見る ↗
PR本紙発行元 EmplifAI