低コスト自律UAVを用いた非接触振動ベースの構造損傷検出
Non-Contact Vibration-Based Damage Detection of Civil Structures Using a Cost-Effective Autonomous UAV
本論文は、低コストの自律UAVを用いてビデオから振動信号を抽出し、構造物の損傷による固有振動数の変化を検出する非接触手法を提案・実験検証した。
詳しい要約
1. どんなもの?
2. 先行研究と比べてどこがすごい?
3. 技術・手法の肝は?
4. どうやって有効だと検証した?
5. 議論はある?
6. 次に読むべき論文は?
※ AIが要旨から生成した要約です。正確性は原文をご確認ください。
著者: Javier Becerril, Maximiliano Vargas, Jennifer Herrera, Joanna Gutierrez, Jorge Rios, Mohsen Amjadian, Constantine Tarawneh, Jinghao Yang, Qi Lu
分類: cs.RO
原文アブストラクト
This paper presents a non-contact approach for vibration-based structural damage detection using an autonomous and customized cost-effective unmanned aerial vehicle (UAV). Vibration signals are extracted from video recordings through vision-based motion tracking to identify shifts in natural frequencies indicative of structural degradation. A laboratory-scale frame structure is evaluated under healthy and simulated-damage conditions. The proposed system is validated through an experimental study involving two smartphones, a USB camera, and a custom-built low-cost UAV equipped with an onboard camera and an autonomous alignment system for operation in GPS-denied environments. The displacement time is extracted and analyzed in the frequency domain and compared to reference measurements from contact accelerometers and a finite element model. Experimental results show that all platforms successfully capture the fundamental frequency and its shift due to damage. Although the UAV exhibits slightly higher errors (up to 5.7%) due to platform-induced disturbances and sensing limitations, it reliably detects damage-induced frequency changes. Compared to commercial UAV systems, the proposed platform achieves comparable inspection performance at significantly lower cost. These results demonstrate that low-cost autonomous UAVs provide a practical, flexible, and scalable solution for structural health monitoring, particularly in scenarios where contact-based sensing is impractical. The findings also support the potential for the deployment of multiple cooperative UAVs to further enhance inspection coverage and robustness.
