姿勢情報を利用した3軸加速度計の線形キャリブレーション
Attitude-Aided Linear Calibration of Triaxial Accelerometers
姿勢情報を利用して3軸加速度計の誤差を線形最小二乗法で推定する新しいキャリブレーション手法を提案し、少ない計測数で高精度な校正を実現した。
詳しい要約
1. どんなもの?
2. 先行研究と比べてどこがすごい?
3. 技術・手法の肝は?
4. どうやって有効だと検証した?
5. 議論はある?
6. 次に読むべき論文は?
※ AIが要旨から生成した要約です。正確性は原文をご確認ください。
著者: Yongqiang Yu, Tian Huang, Yipeng Yang
分類: cs.RO
原文アブストラクト
Triaxial MEMS accelerometers are widely used for inertial sensing, navigation, and sensor fusion, but existing calibration methods often rely on costly reference setups or nonlinear iterative optimization, limiting their efficiency and applicability to low-cost or self-calibrating systems. We present attitude-aided linear accelerometer calibration (ALAC), a method that operates on any platform providing orientation information, such as turntables, robotic arms, or inertial measurement units. ALAC constructs a combined error matrix (CEM) to represent sensor errors in a unified calibration model and enables linear least-squares estimation. The bias and gravity vector are jointly estimated, implicitly accounting for platform misalignment, and matrix decomposition of the CEM recovers scale, non-orthogonality, and alignment rotation parameters. Under static gravity, calibration is formulated as a constrained homogeneous least-squares (CHLS) problem and solved in closed form using standard linear algebra. Only five arbitrarily oriented measurements are required, and a recursive extension supports online or in-field calibration. Experiments on a stationary robot-mounted accelerometer and a quasi-static public IMU trajectory show that ALAC, in both offline and online modes, outperforms reference-based and online baselines in accuracy and robustness to sensor noise. On the same dataset, it matches iterative self-calibration under filtered conditions and surpasses all evaluated baselines on raw measurements. These results demonstrate a robust and practical calibration scheme for MEMS-based inertial platforms, especially low-cost IMUs and online calibration scenarios.
