制御バリア関数を用いた安全なポリトープ内ポリトープ運動計画と制御
Safe Polytope-in-Polytope Motion Planning and Control with Control Barrier Functions
ロボットのポリトープ形状のフットプリントを、連続的に更新される凸自由空間領域内に保証する安全な局所運動計画・制御手法を提案。モデル予測制御内で離散時間制御バリア関数制約として包含条件を定式化し、障害物数に依存しない計算効率を実現。
詳しい要約
1. どんなもの?
2. 先行研究と比べてどこがすごい?
3. 技術・手法の肝は?
4. どうやって有効だと検証した?
5. 議論はある?
6. 次に読むべき論文は?
※ AIが要旨から生成した要約です。正確性は原文をご確認ください。
著者: Alejandro Gonzalez-Garcia, Dries Dirckx, Jan Swevers, Wilm Decré
分類: cs.RO
原文アブストラクト
Autonomous mobile robots operating in tight environments require motion planning frameworks that account for the physical footprint of the robot. Simplifying the geometry to a point or a circle is conservative and discards information needed to successfully and safely traverse narrow passages. This work proposes a safe local motion planning and control method that guarantees that a polytopic robot footprint stays inside a continuously updated convex free-space region. The containment condition is formulated as a set of discrete-time control barrier function constraints within a model predictive controller. The number of safety constraints depends on the complexity of the local free-space geometry and the robot shape, instead of the number of obstacles. The proposed free-space formulation does not need any obstacle detection or segmentation. A comparative analysis against a polytope-based obstacle avoidance formulation confirms favorable scaling up to a reduction of 91$\times$ in computation time as the number of obstacles increases. The approach is validated in simulation with an autonomous surface vehicle and on hardware with a non-holonomic mobile robot, using both occupancy grids and LiDAR sensing. The experiments demonstrate safe real-time motion planning and control at 10~Hz on an onboard embedded computer, including reactive avoidance of dynamic obstacles.
