日本フィジカルAI新聞

世界のフィジカルAIを、日本語で。

歩行arXiv:2606.22073

ばねクラッチ脚を備えたエネルギー回収型リムレスホイールの動力学、安定性、およびエネルギー効率

Dynamics, stability, and energy efficiency of an energy-recycling rimless wheel with spring-clutch legs

シェア:XThreadsFacebookLINEはてブBluesky

衝撃エネルギーを蓄えて再利用するばねクラッチ脚を持つリムレスホイールを提案し、シミュレーションと試作実験で歩行効率の向上と受動歩行の実現可能性を示した。

詳しい要約

1. どんなもの?

- 提案: spring-clutch legs を備えた energy-recycling rimless wheel - 目的: 足接地後の衝撃由来の弾性エネルギーを lockable clutch で蓄え、次歩行周期に再注入 - 対象: 受動歩行の効率と安定性 - 成果: 数値シミュレーションと傾斜面でのプロトタイプ実験を実施

2. 先行研究と比べてどこがすごい?

- 比較対象: benchmark の viscoelastic-legged rimless wheel (telescopic spring-damper legs) - 比較対象: rigid rimless wheel - 提案手法: CoT を最大 16.13% 低減 (viscoelastic-legged 比) - 提案手法: CoT を 50% 以上低減 (rigid 比) - 提案手法: 試験した slope と stiffness の範囲で局所安定な周期歩行を維持

3. 技術・手法の肝は?

- 機構: lockable clutch により足接地後の弾性エネルギーを蓄積・再注入 - モデル: hybrid dynamic model を開発 - 解析: 数値シミュレーションで dynamics, local stability of periodic gaits, CoT を評価 - 実験: 傾斜面でのプロトタイプ実験で受動歩行の実現可能性を検証

4. どうやって有効だと検証した?

- 数値シミュレーション: dynamics, local stability, CoT を評価 - シミュレーション結果: CoT 低減と安定性を確認 - プロトタイプ実験: 傾斜面 (1° slope) で受動歩行を達成 - 実験結果: CoT 約 0.02 を記録

5. 議論はある?

- 提案機構: シミュレーション上の歩行効率を改善 - プロトタイプ: 受動歩行の実現可能性を支持 - 限界: 議論や課題は要旨からは不明

6. 次に読むべき論文は?

- 要旨で参照/比較: viscoelastic-legged rimless wheel, rigid rimless wheel - 関連手法: spring-clutch mechanism, energy-recycling - 同分野の定番: passive dynamic walking, rimless wheel, Cost of Transport (CoT)

※ AIが要旨から生成した要約です。正確性は原文をご確認ください。

著者: Tongchen Lin, Yanqiu Zheng, Chuhan Zhang, Ruigang Chen, Yizhar Or, Mingyi Liu

分類: cs.RO

原文アブストラクト

This paper proposes an energy-recycling rimless wheel with spring-clutch legs. The proposed mechanism uses a lockable clutch to store part of the impact-induced elastic energy after foot contact and reinject it in the next gait cycle. First, we develop a hybrid dynamic model of the energy-recycling rimless wheel. Second, numerical simulations are used to examine the dynamics, local stability of periodic gaits, and the Cost of Transport (CoT) of the proposed mechanism. The simulation results show that the proposed mechanism reduces the CoT by up to 16.13% compared with a benchmark viscoelastic-legged rimless wheel with telescopic spring-damper legs. Compared with the rigid rimless wheel, the viscoelastic-legged and energy-recycling models reduce the CoT by more than 50%. The energy-recycling model also maintains locally stable periodic gaits over the tested slope and stiffness ranges. Finally, prototype experiments on an inclined plane are conducted to examine the feasibility of the proposed mechanism. The experimental results show that the proposed rimless wheel achieves passive walking on a shallow 1{\deg} slope, corresponding to a CoT of approximately 0.02. These results suggest that the proposed spring-clutch mechanism can improve the simulated walking efficiency of the energy-recycling rimless wheel, while the prototype experiments support the feasibility of passive walking with the mechanism.

関連論文

  1. 1Boston Dynamics、車輪付きAtlasの研究試作機を紹介研究・技術
  2. 2newmoとKDDIが資本業務提携 2028年に堺市で自動運転タクシー商用化目指す提携・買収
  3. 3GXOとApptronik、Apolloの物流現場試験を拡大 最大1,000台の展開を構想量産・展開
  4. 4NVIDIA、CoRLでGR00T 2とIsaac Lab 3.0を発表新製品・発表
  5. 5UC BerkeleyとNVIDIAの研究者、AIエージェントでロボット制御コードを仮想環境で改善研究・技術

PR・アフィリエイト広告

FRONTIER(GPU搭載BTOパソコン)

FRONTIER(GPU搭載BTOパソコン)の公式広告バナーFRONTIERでGPU搭載PCを見る ↗
PR本紙発行元 EmplifAI