SE(3)上の風速・状態推定:連続・離散クアッドローター動力学モデルを用いたEKFとUKFの比較評価
Wind and State Estimation on SE(3): Comparative Evaluation of EKF and UKF with Continuous and Discrete Quadrotor Models
クアッドローターの風速推定を、SE(3)上の連続・離散動力学モデルとEKF/UKFで比較し、離散モデル+UKFが低コストセンサでも高精度であることを示した。
詳しい要約
1. どんなもの?
2. 先行研究と比べてどこがすごい?
3. 技術・手法の肝は?
4. どうやって有効だと検証した?
5. 議論はある?
6. 次に読むべき論文は?
※ AIが要旨から生成した要約です。正確性は原文をご確認ください。
著者: Hiranya Udagedara, Adam Bigsby, Mahdis Bisheban
分類: cs.RO
原文アブストラクト
Use of quadrotor UAVs for wind velocity estimation is gaining popularity in recent studies, leveraging their maneuverability, compact size and low cost. Among available approaches, model-based wind velocity estimation is most commonly used, since it relies only on onboard sensors. However, as the quadrotor is a highly nonlinear system, thus making this task challenging. This study evaluate the use of both discrete and continuous dynamic equations of the quadrotor UAV for wind velocity estimation on SE(3), rather than commonly adapted continuous or discretized form. Lie Group Variational Integrator, developed on discrete Lagrangian is used as the discrete model without any approximation or discritization. The study assess both the discrete and continuous form of the quadrotor dynamics on SE(3) using Extended Kalman filter (EKF), and Unscented Kalman filter (UKF). The quadrotor UAV performance is evaluated in both MATLAB-based numerical simulations and free outdoor flight. The numerical simulations are conducted during both hovering and trajectory-tracking flights. Results demonstrate that, by using discrete SE(3) dynamics coupled with UKF, the quadrotor achieves higher estimation accuracy while maintaining trajectory tracking, even with low-cost sensors. These findings highlight the potential of discrete quadrotor models with UKF not only for wind velocity estimation but also for other high-accuracy tasks, even when relying on low-cost onboard sensors.
