日本フィジカルAI新聞

世界のフィジカルAIを、日本語で。

制御arXiv:2607.02474

QuadRocket: ロケット型車両の適応推力ベクトル制御のための空中ロボットテストベッド

QuadRocket: An Aerial Robotic Testbed for Adaptive Thrust-Vector Control of Rocket-Like Vehicles

シェア:XThreadsFacebookLINEはてブBluesky

クアッドロータを推力ベクトルアクチュエータとして用いたロケット型プロトタイプを提案し、適応バックステッピング制御と動的サーフェス制御を組み合わせて軌道追従と外乱補償を実現した。

詳しい要約

1. どんなもの?

- ロケット型機体の推力ベクトル制御を検証するための低コスト・低リスクなテストベッド「QuadRocket」を提案。 - 円筒形の機体をquadrotor上にuniversal jointで結合し、慣性が無視できない飛行倒立振子を構成。 - 制御設計では、結合系を単一の軸対称剛体としてモデル化し、縦軸方向のベクトル推力で駆動。 - 二球面上のreduced-attitude表現を採用し、軸対称性を利用してyawと推力ベクトル方向を分離。 - 適応backstepping制御器を導出し、未知の一定外乱下でほぼ大域的な軌道追従を実現。 - quadrotorを推力ベクトルアクチュエータとして扱い、dynamic-surface-based姿勢制御器を設計。 - シミュレーションと屋内motion-captureアリーナでの実験で有効性を検証。

2. 先行研究と比べてどこがすごい?

- 従来のロケット型機体の推力ベクトル制御検証は高コスト・高リスクな実機や大規模施設を要することが多い。 - 本研究はquadrotorを活用した低コスト・低リスクなテストベッドを提供し、先進制御則の実機検証を容易にする。 - 軸対称性を陽に利用したreduced-attitude表現により、yawと推力ベクトル方向を分離する点が特徴。 - 適応backsteppingとdynamic-surface制御を組み合わせ、未知外乱下でのほぼ大域的な軌道追従を実現。 - 具体的な先行研究との比較は要旨からは不明。

3. 技術・手法の肝は?

- 結合系を単一の軸対称剛体としてモデル化し、縦軸方向のベクトル推力で駆動される系として扱う。 - 二球面上のreduced-attitude表現を採用し、軸対称性を利用してyawと推力ベクトル方向を分離。 - 適応backstepping制御器を導出し、未知の一定外乱下でほぼ大域的な軌道追従を達成。 - control-point transformationにより非最小位相挙動を緩和。 - quadrotorを推力ベクトルアクチュエータとみなし、dynamic-surface-based姿勢制御器で所望の推力ベクトルを追従。 - 仮想制御信号の明示的微分を避け、アクチュエータダイナミクスを考慮。

4. どうやって有効だと検証した?

- シミュレーションで完全なアーキテクチャを評価。 - 屋内motion-captureアリーナでの実験により検証。 - 結果として、正確な軌道追従と効果的な外乱補償を確認。 - QuadRocketが推力ベクトル制御ロボット車両の汎用テストベッドとして適することを確認。

5. 議論はある?

- 要旨からは不明。

6. 次に読むべき論文は?

- 要旨で参照/比較されている研究は明示されていない。 - 同分野の定番として、thrust-vector control、backstepping control、dynamic surface control、quadrotor control、aerial robotics testbeds に関する論文が挙げられる。

※ AIが要旨から生成した要約です。正確性は原文をご確認ください。

著者: Pedro Santos, Joel Reis, Paulo Oliveira, Carlos Silvestre

分類: cs.RO, cs.SY, eess.SY

原文アブストラクト

This paper presents QuadRocket, a quadrotor-based rocket prototype that provides a low-cost, low-risk platform for validating advanced thrust-vector control strategies for launch vehicle-type systems. The prototype consists of a cylindrical main body mounted on top of a quadrotor through a universal joint, forming a flying inverted pendulum with non-negligible inertia. For control design, the coupled system is modeled as a single axisymmetric rigid body actuated by a vectored force applied along its longitudinal axis. A reduced-attitude representation on the two sphere is adopted to explicitly exploit the vehicle's axial symmetry and to decouple yaw from the thrust-vector direction. On this model, we derive an adaptive backstepping controller that achieves almost global trajectory tracking in the presence of unknown constant disturbances, while a control-point transformation mitigates non minimum-phase behavior. The quadrotor is then treated as a thrust vector actuator, and a dynamic-surface-based attitude controller is designed to track the desired thrust-vector, accounting for actuation dynamics and avoiding explicit differentiation of virtual control signals. The complete architecture is evaluated in simulation and validated experimentally in an indoor motion-capture arena. Results demonstrate accurate trajectory tracking, effective disturbance compensation, and confirm the suitability of the QuadRocket as a versatile testbed for thrust-vector-controlled robotic vehicles.

関連論文

  1. 1Boston Dynamics、車輪付きAtlasの研究試作機を紹介研究・技術
  2. 2newmoとKDDIが資本業務提携 2028年に堺市で自動運転タクシー商用化目指す提携・買収
  3. 3GXOとApptronik、Apolloの物流現場試験を拡大 最大1,000台の展開を構想量産・展開
  4. 4NVIDIA、CoRLでGR00T 2とIsaac Lab 3.0を発表新製品・発表
  5. 5UC BerkeleyとNVIDIAの研究者、AIエージェントでロボット制御コードを仮想環境で改善研究・技術

PR・アフィリエイト広告

FRONTIER(GPU搭載BTOパソコン)

FRONTIER(GPU搭載BTOパソコン)の公式広告バナーFRONTIERでGPU搭載PCを見る ↗
PR本紙発行元 EmplifAI