日本フィジカルAI新聞

世界のフィジカルAIを、日本語で。

ハードウェア/触覚/マニピュレーションarXiv:2607.14487

MIDAS Hand: モジュール式低インピーダンス直接駆動の人間型感覚ハンド

MIDAS Hand: Modular low-Impedance Direct-drive Anthropomorphic Sensing Hand

シェア:XThreadsFacebookLINEはてブBluesky

低コストでオープンソースな人間型ロボットハンドを開発し、触覚センサと直接駆動を統合して操作研究用に提供した。

詳しい要約

1. どんなもの?

- MIDAS Handは、低コスト・オープンソース・人間スケールの多指ハンド - 16自由度(うち13能動自由度)を持ち、直接駆動で低い逆駆動トルクを実現 - 283個の三軸触覚センサ(taxel)を統合し、重量700g、BOMコスト3,000ドル未満 - 3Dプリント部品で構成され、3時間以内に組み立て可能 - 設計ファイル、ビルド文書、制御・触覚Python API、シミュレーションモデル、リターゲティング・テレオペレーションパイプラインを公開

2. 先行研究と比べてどこがすごい?

- 既存の多指ハンドは、人間スケールの形態、製造・保守の容易さ、触覚センシング、実用的コストの一部を犠牲にしていた - MIDAS Handはこれらをバランスよく統合し、低コストでオープンソース、かつ触覚センシングを備える点が優位 - 直接駆動による低逆駆動トルクを測定可能な形で実現し、実世界実験に必要な強度・再現性・保守性を提供

3. 技術・手法の肝は?

- 直接駆動アクチュエーションを採用し、逆駆動トルクを低減 - 3Dプリント部品を多用し、組み立て時間を短縮 - 283個の三軸触覚taxelをコンパクトな筐体に統合 - 制御と触覚のPython API、シミュレーションモデル、リターゲティング・テレオペレーションパイプラインをソフトウェアスタックとして提供

4. どうやって有効だと検証した?

- ワークスペースと把持分類の分析 - ペイロードと信頼性テスト - 逆駆動性の測定 - 触覚センシングを用いたテレオペレーションのデモンストレーション - これらを通じて、触覚を伴う器用な操作と人間からロボットへのデータ収集のためのバランスの取れた再現可能なプラットフォームであることを示した

5. 議論はある?

- 要旨からは不明

6. 次に読むべき論文は?

- 要旨で参照・比較されている研究は明示されていない - 同分野の定番として、Shadow Hand、Allegro Hand、LEAP Hand、DexHandなどの多指ハンドや、触覚センシングを統合した研究が挙げられる

※ AIが要旨から生成した要約です。正確性は原文をご確認ください。

著者: Alvin Zhu, Mingzhang Zhu, Beom Jun Kim, Quanyou Wang, Jose Victor S. H. Ramos, Dennis Hong

分類: cs.RO

原文アブストラクト

Dexterous manipulation is limited not only by algorithms but by a shortage of accessible hand hardware that combines human-scale morphology, ease of manufacturing or maintenance, tactile sensing, and practical cost. Existing dexterous hands tend to optimize some of these properties at the expense of others. We present MIDAS Hand, a low-cost, open-source, human-scale dexterous hand with integrated tactile sensing for manipulation research. MIDAS Hand provides 16 total degrees of freedom (DoF) with 13 active DoF, directly driven actuation with measurably low backdrive torque, and 283 three-axis tactile taxels in a compact 700 g package with a bill of materials under 3,000 USD. Built from 3D-printed components, it assembles in under three hours while providing the strength, repeatability, and maintainability needed for repeated real-world experiments. Alongside the hardware, we release a full stack: design files, build documentation, control and tactile Python APIs, simulation models, and retargeting and teleoperation pipelines. We characterize MIDAS Hand through workspace and grasp-taxonomy analysis, payload and reliability tests, backdrivability measurements, and teleoperation demonstrations with tactile sensing, showing that it offers a balanced, reproducible platform for tactile dexterous manipulation and human-to-robot data collection. Project page: https://midas-hand.com

  1. 1Boston Dynamics、車輪付きAtlasの研究試作機を紹介研究・技術
  2. 2newmoとKDDIが資本業務提携 2028年に堺市で自動運転タクシー商用化目指す提携・買収
  3. 3GXOとApptronik、Apolloの物流現場試験を拡大 最大1,000台の展開を構想量産・展開
  4. 4NVIDIA、CoRLでGR00T 2とIsaac Lab 3.0を発表新製品・発表
  5. 5UC BerkeleyとNVIDIAの研究者、AIエージェントでロボット制御コードを仮想環境で改善研究・技術

PR・アフィリエイト広告

MINISFORUM(ミニPC)

MINISFORUM(ミニPC)の公式広告バナーMINISFORUM公式ストアを見る ↗
PR本紙発行元 EmplifAI