塑性変形による連続安定構造
Continuously Stable Structure through Plastic Deformation
塑性変形を利用してエネルギー入力なしで連続的な形状を維持し、剛性を高めたソフトグリッパーを開発。静的・動的安定性を実現し、最大16Nの受動保持力や400m/s^2のパルス加速度下での安定性を実証した。
詳しい要約
1. どんなもの?
2. 先行研究と比べてどこがすごい?
3. 技術・手法の肝は?
4. どうやって有効だと検証した?
5. 議論はある?
6. 次に読むべき論文は?
※ AIが要旨から生成した要約です。正確性は原文をご確認ください。
著者: Junlong Xiao, Yaoqiang Pan, Xuan Zhang, Michael Yu Wang, Chao Chen
分類: cs.RO
原文アブストラクト
Soft robots have seen widespread adoption in interactive tasks due to their inherent compliance and adaptability. However, these advantages often come at the cost of stability, posing challenges in a dynamic environment. This limitation is especially critical in soft grippers, where instability under acceleration or external disturbances can result in grasp failure. In this study, we present a continuously stable structure through plastic deformation (CSSPD), integrated into a soft gripper. By leveraging the mechanism of plastic deformation, the gripper maintains continuous configurations without energy input, while the added stiffness ensures both static and dynamic stability. We introduce a bioinspired paw pad that significantly enhances stability and enables sensing-based rapid object grasping. Then we develop the mathematical model and optimize the kirigami structure of the metal layer. Experimental results show that the gripper can sustain a passive holding force of up to 16 N without energy input, achieving performance comparable to pneumatic actuation at 0.3 MPa. When combined with pneumatic actuation, it remains stable under pulsed accelerations of up to 400 m/s^2. It can also passively perch on tree branches for extended periods without power, demonstrating promise for mobile robotic applications.
関連論文
- 振動で粒状ジャミンググリッパーの性能を向上させるソフトロボティクス/グリッパー
