日本フィジカルAI新聞

世界のフィジカルAIを、日本語で。

マニピュレーションarXiv:2609.12103

RodForesight: 細長ロッド挿入のための世界モデル強化拡散ポリシー

RodForesight: A World Model Enhanced Diffusion Policy for Slender Rod Insertion

シェア:XThreadsFacebookLINEはてブBluesky

細長いロッドの挿入タスクを粗接近と予測挿入の2段階に分け、拡散ポリシーと行動条件付き世界モデルを組み合わせて挿入前に候補行動の効果を予測・選択することで成功率を向上させた学習フレームワーク。

詳しい要約

1. どんなもの?

- 精密製造における細長いロッドの挿入タスクを対象とした学習フレームワーク。 - 従来のpeg-in-hole手法は剛体を仮定し、ロッドの先端姿勢がグリッパに対して固定されていると仮定するが、高アスペクト比のロッドでは曲がりが生じ、この仮定が崩れる。 - RodForesightはタスクを2段階に分解する:1) 粗接近(visual servoingで多様な初期配置を穴近くのハンドオフ領域にマッピング)、2) 予測挿入(微細位置合わせと挿入完了)。 - 2段階はエンドツーエンド設計にラップ可能。 - 挿入時、diffusion policyが候補行動チャンクを生成し、action conditioned world modelがロッドと穴の位置合わせへの影響を予測。実行前に予測された傾きと半径方向誤差に基づいて最良の行動チャンクを選択する。

2. 先行研究と比べてどこがすごい?

- 従来のpeg-in-hole手法は剛体を仮定し、ロッド先端姿勢がグリッパに対して固定されていると仮定するが、高アスペクト比のロッドでは曲がりが生じ、この仮定が崩れる。 - RodForesightはロッドの曲がりを考慮し、world modelを用いて行動の影響を予測することで、この問題に対処。 - 実験では、diffusion policyなどのベースライン手法と比較して、成功率を88.9%から96.7%に改善。

3. 技術・手法の肝は?

- タスクを2段階に分解:1) 粗接近(visual servoingで多様な初期配置を穴近くのハンドオフ領域にマッピング)、2) 予測挿入(微細位置合わせと挿入完了)。 - 2段階はエンドツーエンド設計にラップ可能。 - 挿入時、diffusion policyが候補行動チャンクを生成。 - action conditioned world modelが候補行動チャンクのロッドと穴の位置合わせへの影響を予測。 - 実行前に予測された傾きと半径方向誤差に基づいて最良の行動チャンクを選択。

4. どうやって有効だと検証した?

- 実験では、異なる段階の性能とエンドツーエンド設定を調査。 - RodForesightは、diffusion policyなどのベースライン手法と比較して、成功率を88.9%から96.7%に改善。

5. 議論はある?

- 要旨からは不明。

6. 次に読むべき論文は?

- diffusion policy(ベースライン手法として比較) - peg-in-hole手法(従来手法として言及) - visual servoing(粗接近段階で使用) - world model(action conditioned world modelとして使用)

※ AIが要旨から生成した要約です。正確性は原文をご確認ください。

著者: Chuanbo Yu, Mingyu Yue, Yan Lyu, Chuhan Song, Peng Wang

分類: cs.RO

原文アブストラクト

Slender rod insertion arises in precision manufacturing, where millimetre scale diameter and tight clearances demand accurate perception and control. Conventional peg-in-hole methods assume a rigid object whose tip pose is fixed relative to the gripper. This assumption breaks down for a high aspect ratio rod, which can bend during manipulation, making its tip motion dependent on the rod configuration, grasp, material properties, and contact. We present RodForesight, a learning framework that factorises the task into two stages: 1) coarse approaching, which uses visual servoing to map diverse initial configurations into a compact near hole hand-off region; and 2) predictive insertion, which performs fine alignment and completes the insertion. It is worth noting that the two stages can be wrapped into an end-to-end design. During insertion, a diffusion policy generates candidate action chunks, while an action conditioned world model predicts their effects on rod-hole alignment. This pre-execution evaluation enables RodForesight to select the best action chunk based on predicted tilt and radial errors before execution. Experiments investigate the performance of different stages and the end-to-end setting, where RodForesight improves the success rate from 88.9% to 96.7%, compared to baseline methods such as diffusion policy.

関連論文

  1. 1Boston Dynamics、車輪付きAtlasの研究試作機を紹介研究・技術
  2. 2newmoとKDDIが資本業務提携 2028年に堺市で自動運転タクシー商用化目指す提携・買収
  3. 3GXOとApptronik、Apolloの物流現場試験を拡大 最大1,000台の展開を構想量産・展開
  4. 4NVIDIA、CoRLでGR00T 2とIsaac Lab 3.0を発表新製品・発表
  5. 5UC BerkeleyとNVIDIAの研究者、AIエージェントでロボット制御コードを仮想環境で改善研究・技術

PR・アフィリエイト広告

FRONTIER(GPU搭載BTOパソコン)

FRONTIER(GPU搭載BTOパソコン)の公式広告バナーFRONTIERでGPU搭載PCを見る ↗
PR本紙発行元 EmplifAI