日本フィジカルAI新聞

世界のフィジカルAIを、日本語で。

外骨格/アクチュエータarXiv:2609.23487

トルク/張力デュアルモード切替可能なケーブル駆動アクチュエータの設計と制御:外骨格への応用

Design and Control of a Cable-Driven Switchable Actuator with Torque/Tension Dual Modes for Exoskeletons

シェア:XThreadsFacebookLINEはてブBluesky

外骨格用に、関節トルクと直線張力を高速切替できるケーブル駆動アクチュエータを開発し、近位センサ融合と適応制御で遠位力を推定・制御した。

詳しい要約

1. どんなもの?

- ケーブル駆動型の切替可能アクチュエータ(CDSA)を提案 - トルクモードとテンションモードを高速に切替可能 - 全てのセンシングとアクチュエーションを近位駆動ユニットに集中 - 外骨格の多様なトレーニングシナリオへの適応性を向上

2. 先行研究と比べてどこがすごい?

- 従来の外骨格は単一の機械出力モダリティに制約 - 関節トルクか直線牽引のいずれかしか提供できず、適応性が限定的 - CDSAは両モードを切替可能で、遠位に計測器を必要としない点が優位

3. 技術・手法の肝は?

- Coupled Movable Pulley Mechanism (CMPM)で遠位端の張力増幅 - 双方向Cable-Driven Ratchet Mechanism (CDRM)でモード切替と予圧調整 - 多源近位センサとデータ駆動型融合モデルで遠位出力力を推定 - 反復学習制御(ILC)に基づく適応デュアルモード力制御戦略

4. どうやって有効だと検証した?

- プラットフォーム実験で伝達効率を評価 - トルクモード: (92.4 ± 2.0)% - テンションモード: (96.5 ± 3.3)% - テンションモードの張力増幅比: 2.77 ± 0.10 - 模擬膝関節歩行軌道と短ストローク張力プロファイルの追従試験 - RMSE: 非制御ピーク値の (4.52 ± 0.51)% と (3.15 ± 0.19)% - 座位での人間結合実験で両モードの制御可能な力生成を検証

5. 議論はある?

- 要旨からは不明

6. 次に読むべき論文は?

- 要旨で参照/比較されている研究は明示されていない - 同分野の定番として、外骨格用のSeries Elastic Actuator (SEA)やケーブル駆動型外骨格、反復学習制御 (ILC) の関連研究が挙げられる

※ AIが要旨から生成した要約です。正確性は原文をご確認ください。

著者: YuanLong Ji, Xu Liu, Xinyuan Cai, Qihan Ye, Xiangyu Xie, Ruizhe Jiang, Shuhan Xiang, Wenjing Liu, Qijun Wang, Yang Chen, Xingbang Yang

分類: cs.RO, eess.SY

原文アブストラクト

Existing wearable exoskeleton architectures are typically constrained by a single mechanical output modality, providing either joint torque around an anatomical joint or linear traction along a limb-training-oriented direction, which limits adaptability to diverse training scenarios. This letter presents a cable-driven switchable actuator (CDSA) that can rapidly switch between torque and tension modes while centralizing all sensing and actuation components at the proximal drive unit. A Coupled Movable Pulley Mechanism (CMPM) provides tension amplification at the distal end-effector, while a bidirectional Cable-Driven Ratchet Mechanism (CDRM) enables mode switching and preload regulation. To eliminate the need for distal instrumentation, multi-source proximal sensors are integrated with a data-driven fusion model to estimate distal output forces. An adaptive dual-mode force control strategy based on iterative learning control (ILC) is further developed. Platform experiments demonstrate transmission efficiencies of $(92.4 \pm 2.0)\%$ and $(96.5 \pm 3.3)\%$ in the torque and tension modes, respectively, along with a tension amplification ratio of $2.77 \pm 0.10$ under tension mode. Tracking tests on simulated knee-joint gait trajectories and short-stroke tension profiles yield stable control, with RMSEs of $(4.52 \pm 0.51)\%$ and $(3.15 \pm 0.19)\%$ of the uncontrolled peak value, respectively. Finally, seated human-coupled experiments validate the system's controllable force generation in both joint-torque and linear-traction application modes.

関連論文

  1. 1Boston Dynamics、車輪付きAtlasの研究試作機を紹介研究・技術
  2. 2newmoとKDDIが資本業務提携 2028年に堺市で自動運転タクシー商用化目指す提携・買収
  3. 3GXOとApptronik、Apolloの物流現場試験を拡大 最大1,000台の展開を構想量産・展開
  4. 4NVIDIA、CoRLでGR00T 2とIsaac Lab 3.0を発表新製品・発表
  5. 5UC BerkeleyとNVIDIAの研究者、AIエージェントでロボット制御コードを仮想環境で改善研究・技術

PR・アフィリエイト広告

FRONTIER(GPU搭載BTOパソコン)

FRONTIER(GPU搭載BTOパソコン)の公式広告バナーFRONTIERでGPU搭載PCを見る ↗
PR本紙発行元 EmplifAI