日本フィジカルAI新聞

世界のフィジカルAIを、日本語で。

進化ロボティクスarXiv:2609.33101

ゼロから進化する器用なロボット

Evolving Dexterous Robots from Scratch

シェア:XThreadsFacebookLINEはてブBluesky

身体の構造を一切仮定せずに、物体の把持・回転・操作が可能なロボットを進化的手法で自動設計し、実機でゼロショット検証した研究。

詳しい要約

1. どんなもの?

- 本研究は、器用な操作が可能なロボットをゼロから進化的に設計する手法を提案する。 - 従来のロボットハンド設計とは異なり、身体の部位の存在、関節、形状を前提とせず、自由な形態のロボットを進化させる。 - 対象タスクは、多様な物体の把持、保持、回転、使用。 - 進化した設計は自動的に製造可能な設計図に変換され、3Dプリント・組み立て・実世界でのゼロショットテストまで行われる。 - 結果は、性能・多様性・複雑さの点で進化ロボティクスの最先端を代表する。

2. 先行研究と比べてどこがすごい?

- 従来のロボットハンド最適化アプローチでは、身体部位の存在、関節、形状を事前に仮定していた。 - 本研究ではそのような仮定を一切置かず、全く自由な形態から設計を進化させる点が革新的。 - 尾、くちばし、足、爪といった既知の把持形態が自発的に出現する可能性もあるが、de novoな設計により、見過ごされてきた新規構造が発見される可能性を示す。 - 性能・多様性・複雑さにおいて、進化ロボティクスの最先端を達成。

3. 技術・手法の肝は?

- 設計空間を高度に探索可能な遺伝的埋め込みをcontrastive learningで構築。 - autoregressive developmental modelを用いて設計をデコード。 - evolutionary strategiesで優れた設計を探索。 - 各進化した設計をreinforcement learningで訓練。 - 勝利した設計は自動的に製造可能な設計図に変換され、実世界でゼロショットテスト。

4. どうやって有効だと検証した?

- 進化した設計を自動的に製造可能な設計図に変換し、3Dプリント・組み立てを行い、実世界でゼロショットでテスト。 - 多様な物体の把持、保持、回転、使用タスクで評価。 - 結果は性能・多様性・複雑さの点で進化ロボティクスの最先端を達成。

5. 議論はある?

- 動物の操作を模倣するのではなく、人工機械に最適な新規構造を発見できる可能性。 - 尾、くちばし、足、爪などの既知の形態が自発的に出現する条件は進化生物学者にとって興味深いかもしれない。 - 一方で、de novo設計は見過ごされてきた新規構造を明らかにし、タスクに適する可能性がある。 - 要旨からは、具体的な議論や限界については不明。

6. 次に読むべき論文は?

- 要旨で参照/比較されている研究は明示されていない。 - 関連手法として、evolutionary robotics、reinforcement learning、contrastive learning、autoregressive developmental modelが挙げられる。 - 同分野の定番として、OpenAIのDactylやDeepMindのロボットハンド研究などが考えられるが、要旨には記載なし。

※ AIが要旨から生成した要約です。正確性は原文をご確認ください。

著者: Zihan Guo, Shuzhe Zhang, Muhan Li, Peiyang Li, Sam Kriegman

分類: cs.RO, cs.LG

原文アブストラクト

Little is known about how to manually design agents capable of dexterous manipulation. Some design principles have been inferred from close examination of how animals manipulate objects, but these structures and behaviors have so far resisted biomimicry and may not be optimal for artificial machines. Here we evolve freeform robots to pick up, hold, rotate, and use diverse objects. Unlike other approaches to optimizing robot hands, we do not presuppose the presence, articulation, or geometry of any part of the body. Although familiar prehensile forms such as tails, beaks, paws and claws may emerge spontaneously under certain conditions--and while such conditions could be of interest to evolutionary biologists--de novo manipulator design can also reveal whole new solutions, overlooked or unknown structures which may be better suited for the task at hand. We use contrastive learning to create a highly searchable genetic embedding of design space, an autoregressive developmental model to decode designs, evolutionary strategies to find good designs, and reinforcement learning to train each evolved design. Winning designs were automatically converted into a manufacturable blueprint, printed, assembled and tested in the real world in a zero-shot manner. The results represent the state-of-the-art in evolutionary robotics in terms of performance, diversity and complexity.

関連論文

  1. 1Boston Dynamics、車輪付きAtlasの研究試作機を紹介研究・技術
  2. 2GXOとApptronik、Apolloの物流現場試験を拡大 最大1,000台の展開を構想量産・展開
  3. 3newmoとKDDIが資本業務提携 2028年に堺市で自動運転タクシー商用化目指す提携・買収
  4. 4NVIDIA、CoRLでGR00T 2とIsaac Lab 3.0を発表新製品・発表
  5. 5UC BerkeleyとNVIDIAの研究者、AIエージェントでロボット制御コードを仮想環境で改善研究・技術

PR・アフィリエイト広告

FRONTIER(GPU搭載BTOパソコン)

FRONTIER(GPU搭載BTOパソコン)の公式広告バナーFRONTIERでGPU搭載PCを見る ↗
PR本紙発行元 EmplifAI