モデル情報を活用したロバスト幾何DDPCによるフィードバック線形化軌道追従
Feedback-Linearised Trajectory Tracking via Model-Informed Robust Geometric DDPC
モデルベースのフィードバック線形化とデータ駆動予測制御を組み合わせ、残差ダイナミクスをグラスマン多様体上のロバスト最適化で扱う軌道追従手法を提案し、2Rマニピュレータで有効性を検証した。
詳しい要約
1. どんなもの?
2. 先行研究と比べてどこがすごい?
3. 技術・手法の肝は?
4. どうやって有効だと検証した?
5. 議論はある?
6. 次に読むべき論文は?
※ AIが要旨から生成した要約です。正確性は原文をご確認ください。
著者: Pranav Gupta, Deepan Muthirayan, Ravi Banavar
分類: cs.RO, eess.SY
原文アブストラクト
Data-driven predictive control (DDPC) predicts system responses from recorded trajectories, but nonlinear dynamics can limit the accuracy of fixed linear predictors. This paper studies geometric robust DDPC for trajectory tracking of a fully actuated manipulator using model-based feedback linearisation. A mechanical model maps virtual acceleration commands into joint torques, while recorded data capture residual dynamics arising from imperfect model parameters. The controller minimises worst-case prediction error over an open Grassmannian ball centred at the fitted trajectory subspace. Simulations on a planar 2R manipulator under gravity compare the proposed method with double-integrator model predictive control (MPC) and direct regularised data-enabled predictive control (DeePC). Results show improved tracking over double-integrator MPC despite increased torque effort, while performance relative to DeePC depends on the reference trajectory.
関連論文
- タスク収束フローマッチングによる生成ロボティクスマニピュレーション
- 保持基準が視覚的リカバリ性能の評価を左右する:待機制御下での協調リカバリ分析マニピュレーション
- 学習済み力学系を用いた協調モバイルマニピュレーションマニピュレーション
- 内視鏡環境におけるMoveItを用いた逆運動学の改善マニピュレーション
- 複数の安定目標を持つ動作プリミティブを模倣学習するmulti-CONDORマニピュレーション
- 制御バリア関数と可変インピーダンス制御による全電動重作業ロボットマニピュレータの安全な物理的相互作用マニピュレーション
