配管内を走行する柔軟オムニクローラロボット
COCrIP: Compliant OmniCrawler In-pipeline Robot
柔軟に折り畳めるオムニクローラ機構を3つ連結し、狭い配管内の急カーブも走行できるモジュール式管内昇降ロボットを開発した。バネ剛性を最適化し、実機実験で有効性を検証した。
著者: Akash Singh, Enna Sachdeva, Abhishek Sarkar, K. Madhava Krishna
分類: cs.RO
原文アブストラクト
This paper presents a modular in-pipeline climbing robot with a novel compliant foldable OmniCrawler mechanism. The circular cross-section of the OmniCrawler module enables a holonomic motion to facilitate the alignment of the robot in the direction of bends. Additionally, the crawler mechanism provides a fair amount of traction, even on slippery surfaces. These advantages of crawler modules have been further supplemented by incorporating active compliance in the module itself which helps to negotiate sharp bends in small diameter pipes. The robot has a series of 3 such compliant foldable modules interconnected by the links via passive joints. For the desirable pipe diameter and curvature of the bends, the spring stiffness value for each passive joint is determined by formulating a constrained optimization problem using the quasi-static model of the robot. Moreover, a minimum friction coefficient value between the module-pipe surface which can be vertically climbed by the robot without slipping is estimated. The numerical simulation results have further been validated by experiments on real robot prototype.
