適応アドミタンス制御による力覚ガイダンス下での曲面へのロボット支援ドリル加工
Robot-Assisted Drilling on Curved Surfaces with Haptic Guidance under Adaptive Admittance Control
6自由度適応アドミタンス制御をKUKA LBR iiwa 7に実装し、ARと力覚ガイダンスで曲面へのドリル穴あけを支援するシステムを開発した。
著者: Alireza Madani, Pouya P. Niaz, Berk Guler, Yusuf Aydin, Cagatay Basdogan
分類: cs.RO, cs.SY, eess.SY
原文アブストラクト
Drilling a hole on a curved surface with a desired angle is prone to failure when done manually, due to the difficulties in drill alignment and also inherent instabilities of the task, potentially causing injury and fatigue to the workers. On the other hand, it can be impractical to fully automate such a task in real manufacturing environments because the parts arriving at an assembly line can have various complex shapes where drill point locations are not easily accessible, making automated path planning difficult. In this work, an adaptive admittance controller with 6 degrees of freedom is developed and deployed on a KUKA LBR iiwa 7 cobot such that the operator is able to manipulate a drill mounted on the robot with one hand comfortably and open holes on a curved surface with haptic guidance of the cobot and visual guidance provided through an AR interface. Real-time adaptation of the admittance damping provides more transparency when driving the robot in free space while ensuring stability during drilling. After the user brings the drill sufficiently close to the drill target and roughly aligns to the desired drilling angle, the haptic guidance module fine tunes the alignment first and then constrains the user movement to the drilling axis only, after which the operator simply pushes the drill into the workpiece with minimal effort. Two sets of experiments were conducted to investigate the potential benefits of the haptic guidance module quantitatively (Experiment I) and also the practical value of the proposed pHRI system for real manufacturing settings based on the subjective opinion of the participants (Experiment II).
関連論文
- 経験時代における実世界コード・アズ・ポリシー:ACE-CaP-0マニピュレーション
- 把持のアドミタンスによる入出力特性評価:設計パラメータと把持挙動の接続マニピュレーション
- ManiLadder:カテゴリ別・多難易度タスクラダーによるロボットマニピュレーションのベンチマークマニピュレーション
- 成功確率を変える事象を記憶する:Criticゲート付きイベントメモリによる長期的マニピュレーションマニピュレーション
- BiPOP: 長期的な両腕ロボット操作のための部分順序計画マニピュレーション
- RUMI: 拡張現実と触覚フィードバックを備えたRobotiq対応の汎用マニピュレーションインターフェースマニピュレーション
