埋め込みセンサと単一平面を用いたヒューマノイドロボットの全身幾何キャリブレーション
Humanoid Robot Whole-body Geometric Calibration with Embedded Sensors and a Single Plane
単一平面と内蔵力センサ、アドミタンス制御を用いて、人手を介さずにヒューマノイドの全身運動学をキャリブレーションする手法を提案し、最適姿勢選択アルゴリズムIROCで31姿勢のみで高精度化を実現した。
詳しい要約
1. どんなもの?
2. 先行研究と比べてどこがすごい?
3. 技術・手法の肝は?
4. どうやって有効だと検証した?
5. 議論はある?
6. 次に読むべき論文は?
※ AIが要旨から生成した要約です。正確性は原文をご確認ください。
著者: Thanh D V Nguyen, Vincent Bonnet, Pierre Fernbach, David Daney, Florent Lamiraux
分類: cs.RO
原文アブストラクト
Whole-body geometric calibration of humanoid robots using classical robot calibration methods is a timeconsuming and experimentally burdensome task. However, despite its significance for accurate control and simulation, it is often overlooked in the humanoid robotics community. To address this issue, we propose a novel practical method that utilizes a single plane, embedded force sensors, and an admittance controller to calibrate the whole-body kinematics of humanoids without requiring manual intervention. Given the complexity of humanoid robots, it is crucial to generate and determine a minimal set of optimal calibration postures. To do so, we propose a new algorithm called IROC (Information Ranking algorithm for selecting Optimal Calibration postures). IROC requires a pool of feasible candidate postures to build a normalized weighted information matrix for each posture. Then, contrary to other algorithms from the literature, IROC will determine the minimal number of optimal postures that are to be played onto a robot for its calibration. Both IROC and the single-plane calibration method were experimentally validated on a TALOS humanoid robot. The total whole-body kinematics chain was calibrated using solely 31 optimal postures with 3-point contacts on a table by the robot gripper. In a cross-validation experiment, the average root-mean-square (RMS) error was reduced by a factor of 2.3 compared to the manufacturer's model.
