日本フィジカルAI新聞

世界のフィジカルAIを、日本語で。

マニピュレーションarXiv:2605.22021

オンライン慣性推定と凸レンチ最適化による産業用双腕ボックスハンドリング

Industrial Dual-Arm Box Handling via Online Inertial Estimation and Convex Wrench Optimization

シェア:XThreadsFacebookLINEはてブBluesky

未知の質量・重心を持つ箱を双腕ロボットで安定に持ち上げるため、接触力から慣性をオンライン推定し、摩擦制約付きのSOCPで力を最適化する手法を提案・実機検証した。

詳しい要約

1. どんなもの?

本論文は、質量や重心位置が未知の箱や荷物を産業用dual-armロボットで把持・持ち上げるための枠組みを提案する。接触wrenchから物体の質量と重心をオンライン推定し、摩擦を考慮した接触力とトルクをSOCPで計算する。滑りや落下、姿勢ずれ、過剰な押し付けを防ぎつつ安定した持ち上げを実現する。

2. 先行研究と比べてどこがすごい?

従来は滑り回避と過剰押し付けを別々の調整対象として扱うことが多かったが、本手法は摩擦実現可能性をhard constraintとして課し、実行可能領域内で接触努力を最小化するため、別々のチューニングを不要にする点が優れている。また、未知の慣性特性をオンラインで推定しながらdual-armで箱を扱う枠組みを実機で示した点が新しい。

3. 技術・手法の肝は?

接触wrenchの測定値から物体の質量と重心をオンライン推定する。その推定値を用い、ellipsoidal friction-limit-surface制約の下で摩擦実現可能な接触力とtorsional momentをsecond-order cone program (SOCP)により計算する。さらに、幾何制約がある場合に物体と環境の不要な接触を減らすオフライン軌道修正段階を含む。摩擦実現可能性をhard constraintとし、実行可能領域内で接触努力を最小化する。

4. どうやって有効だと検証した?

実dual-armロボットシステムを用い、異なる重心配置の条件下で実験を行った。その結果、未知の慣性特性を持つ物体を持ち上げつつ、安定した摩擦接触を維持できることを示した。

5. 議論はある?

要旨からは、提案手法の限界や失敗ケース、計算コスト、推定精度の議論については不明である。また、オフライン軌道修正がどの程度有効か、どのような幾何制約を想定しているかの詳細も要旨からは不明である。

6. 次に読むべき論文は?

要旨で参照・比較されている研究は明示されていない。関連手法として、dual-arm manipulation、friction cone constraints、second-order cone programming (SOCP) を用いたwrench optimization、online inertial parameter estimation、slip avoidance に関する文献が次に読むべき候補となる。

※ AIが要旨から生成した要約です。正確性は原文をご確認ください。

著者: Kenzhi Iskandar Wong, Lin Yang, Qian Ying Lee, Domenico Campolo

分類: cs.RO

原文アブストラクト

Industrial robotic object handling often involves boxes and packages whose mass and center of mass are not known in advance. These uncertainties affect the force--moment balance required for stable lifting, and improper regulation of contact wrenches can lead to slip, object drop, orientation deviation, or excessive squeezing. This paper presents a friction-aware dual-arm box-handling framework for objects with unknown inertial properties. The proposed approach estimates the object mass and center of mass online from measured contact wrenches, and computes friction-feasible contact forces and torsional moments through a second-order cone program (SOCP) under ellipsoidal friction-limit-surface constraints. An offline trajectory refinement stage is also included to reduce undesired object--environment contact when geometric constraints are present. By enforcing friction feasibility as a hard constraint and minimizing contact effort within the feasible region, the framework achieves stable lifting without treating slip avoidance and excessive squeezing as separately tuned objectives. Experiments on a real dual-arm robotic system under different center-of-mass configurations demonstrate that the method lifts objects with unknown inertial properties while maintaining stable frictional contact.

関連論文

  1. 1Boston Dynamics、車輪付きAtlasの研究試作機を紹介研究・技術
  2. 2GXOとApptronik、Apolloの物流現場試験を拡大 最大1,000台の展開を構想量産・展開
  3. 3newmoとKDDIが資本業務提携 2028年に堺市で自動運転タクシー商用化目指す提携・買収
  4. 4NVIDIA、CoRLでGR00T 2とIsaac Lab 3.0を発表新製品・発表
  5. 5UC BerkeleyとNVIDIAの研究者、AIエージェントでロボット制御コードを仮想環境で改善研究・技術

PR・アフィリエイト広告

FRONTIER(GPU搭載BTOパソコン)

FRONTIER(GPU搭載BTOパソコン)の公式広告バナーFRONTIERでGPU搭載PCを見る ↗
PR本紙発行元 EmplifAI