日本フィジカルAI新聞

世界のフィジカルAIを、日本語で。

ソフトロボティクスarXiv:2609.23132

壁面後退と展開可能な指によるソフト伸長ロボットの先端マニピュレーション

Tip Manipulation in Soft Everting Robots via Wall Retraction and Deployable Fingers

シェア:XThreadsFacebookLINEはてブBluesky

ソフト伸長ロボットの先端に、壁面後退機構と展開可能な空気圧指を組み合わせ、多様な物体の把持や積み重ね、狭所検査を可能にした研究。

詳しい要約

1. どんなもの?

- Soft everting robots の tip manipulation と multi-tool deployment を可能にする新戦略 - wall retraction に基づく - base roller assembly で outer wall の membrane flow を独立に計量 - tail spool で internal tail section の成長を調整 - 膜に取り付けたデバイスを distal tip 近くで輸送・露出・再配置 - 超軽量 pleated inflatable fingers を膜に統合 - TPU-coated nylon 製、内部 airtight bladder - 低圧で大きな曲げ(高 pleat 設計で 50 kPa 時に約 100 度) - blocking force 最大 1.9 N - 輸送中は limp - 適応的 grasping、3D 操作、stacking、環境に brace した extension、distal camera panning、順次 payload…

2. 先行研究と比べてどこがすごい?

- 従来の soft everting robots は tip 付近に固定された単一ツールのみで、能動的相互作用が限定的 - オンデマンドで再配置不可 - ソフトボディとの整合が困難 - 本研究は wall retraction と tail actuation の協調により、ロボット長と膜材料位置を分離 - 膜搭載デバイスを選択位置で輸送・露出・再配置可能 - 超軽量で低圧駆動の pleated inflatable fingers を統合し、輸送時は柔軟、操作時は把持力を発揮 - これにより embodied で reversible な tip manipulation を実現

3. 技術・手法の肝は?

- base roller assembly で outer wall の membrane flow を独立に計量 - tail spool で internal tail section の成長を調整 - wall と tail の協調 actuation により、ロボット長と膜材料位置を decouple - 膜に統合した ultralight pleated inflatable fingers - TPU-coated nylon 製、内部 airtight bladder - 高 pleat 設計で 50 kPa 時に約 100 度の曲げ - blocking force 最大 1.9 N - 輸送中は limp を維持

4. どうやって有効だと検証した?

- 多様な household objects の適応的 grasping(21〜550 g、16〜200 mm) - 3D object manipulation と stacking - 環境に brace した extension - 閉所検査のための distal camera panning - 制御された順次 payload delivery - これらのデモンストレーションにより有効性を検証

5. 議論はある?

- 要旨からは不明 - 限界や課題についての議論は記載されていない

6. 次に読むべき論文は?

- 要旨で参照/比較されている研究は明示されていない - 同分野の関連手法として soft growing robots、everting robots、tip manipulation、inflatable actuators の定番研究が挙げられる

※ AIが要旨から生成した要約です。正確性は原文をご確認ください。

著者: Nelson Badillo Perez, Niccolo Pagliarani, Matteo Cianchetti, Robert D. Howe

分類: cs.RO

原文アブストラクト

Soft everting robots can traverse long, confined paths by continuously growing, yet active interaction remains limited to a single tool fixed at or near the tip, unable to be repositioned on demand and difficult to reconcile with the robot's soft body. We introduce a tip-manipulation and multi-tool deployment strategy for soft everting robots based on wall retraction, implemented with a base roller assembly that independently meters membrane flow in the outer wall while a tail spool regulates growth in the internal tail section. Coordinated wall and tail actuation decouples robot length from membrane-material position, enabling membrane-mounted devices to be transported, exposed, and repositioned at selected locations near the distal tip. We pair this capability with ultralight pleated inflatable fingers integrated into the membrane, fabricated from TPU-coated nylon with an internal airtight bladder. The fingers achieve large bending at low pressures (approximately 100 degrees at 50 kPa in high-pleat designs) and generate blocking forces up to 1.9 N, while remaining limp during transport. The system demonstrates adaptive grasping across diverse household objects (21 to 550 g; 16 to 200 mm), three-dimensional object manipulation and stacking, environmentally braced extension, distal camera panning for confined-space inspection, and controlled sequential payload delivery. These results enable embodied and reversible tip manipulation for soft growing robots in cluttered and tortuous environments.

関連論文

  1. 1Boston Dynamics、車輪付きAtlasの研究試作機を紹介研究・技術
  2. 2GXOとApptronik、Apolloの物流現場試験を拡大 最大1,000台の展開を構想量産・展開
  3. 3newmoとKDDIが資本業務提携 2028年に堺市で自動運転タクシー商用化目指す提携・買収
  4. 4NVIDIA、CoRLでGR00T 2とIsaac Lab 3.0を発表新製品・発表
  5. 5UC BerkeleyとNVIDIAの研究者、AIエージェントでロボット制御コードを仮想環境で改善研究・技術

PR・アフィリエイト広告

FRONTIER(GPU搭載BTOパソコン)

FRONTIER(GPU搭載BTOパソコン)の公式広告バナーFRONTIERでGPU搭載PCを見る ↗
PR本紙発行元 EmplifAI