不完全な並列マニピュレータの剛性モデリング
Stiffness modeling of non-perfect parallel manipulators
幾何誤差を持つ直列鎖からなる並列マニピュレータについて、組立時の内部力と弾性変形を考慮した非線形剛性モデリング手法を提案し、Orthoglide系で検証した。
著者: Alexandr Klimchik, Anatol Pashkevich, Damien Chablat
分類: cs.RO
原文アブストラクト
The paper focuses on the stiffness modeling of parallel manipulators composed of non-perfect serial chains, whose geometrical parameters differ from the nominal ones. In these manipulators, there usually exist essential internal forces/torques that considerably affect the stiffness properties and also change the end-effector location. These internal load-ings are caused by elastic deformations of the manipulator ele-ments during assembling, while the geometrical errors in the chains are compensated for by applying appropriate forces. For this type of manipulators, a non-linear stiffness modeling tech-nique is proposed that allows us to take into account inaccuracy in the chains and to aggregate their stiffness models for the case of both small and large deflections. Advantages of the developed technique and its ability to compute and compensate for the compliance errors caused by different factors are illustrated by an example that deals with parallel manipulators of the Or-thoglide family
